ohmex VVC 1322 Manuel D'utilisation page 59

VVC 1322
CLEANING AND MAINTENANCE
• Clean the filter (14) by flapping it in a waste container (basket, etc.).
If necessary, blow it with air, paying attention not to damage it.
• If necessary, wash the support (13) with water and neutral soap; abundantly rinse them
with water.
Wait for it to be completely dry.
Do not wash the filter (14). If it's worn, replace it.
Do not use the appliance if the filters and the supports are damaged.
Do not use the appliance without the filters (14).
Brush cleaning
• The brush (11) could collect yarns, hair, etc. through its
bristles during use.
Clean it removing dirt from the bristles.
11
EN
55