ohmex VVC 1322 Manuel D'utilisation page 55

VVC 1322
PREPARING THE APPLIANCE
- Connect the charger (12) to the power socket
(100-240V~ 50/60Hz).
- Insert the male connector (20) into the socket (5).
- During recharge phase, the indicator (3) lights
steady red.
When the indicator (3) lights steady blue, it means
that the battery is completely charged.
- It is advised to disconnect the feeder from the
appliance and from the power socket when the
battery is charged.
Do not recharge the batteries immediately
after the appliance use.
Wait for the batteries to cool down
(approximately 1 hour).
ASSEMBLY
1) Insert the brush (11) on the extension
end (8); a "click" can be heard.
2) insert the other end of the extension (8)
complete with the brush on the motor
body (4); a "click" can be heard.
3
8
11
100-240V~ 50/60Hz
5
20
4
8
EN
51