Li-Ion Battery; Reprocessing; Cleaning/Disinfection - Aesculap DURATI Mode D'emploi

4.4.4 Li-ion battery

8
3
Fig. 6
Hold DURATI battery-powered shearing machine 2
and press battery release lock 3.
Pull out Li-ion battery 7 from DURATI battery-
powered shearing machine 2.
Insert the charged Li-ion battery 7 in DURATI bat-
tery-powered shearing machine 2 as far as it will
go.
The DURATI battery-powered shearing machine 2
is ready for operation.
5.

Reprocessing

Damage to, or destruction of the
product
cleaning/disinfecting or steriliza-
tion!
CAUTION
Only clean and disinfect the
product manually.
Do not sterilize the product
under any circumstances.
2
3
caused by mechanical

5.1 Cleaning/Disinfection

Note
Always follow disposal and hygiene instructions and
regulations!
Manual cleaning/disinfection
Risk of electric shock and fire haz-
ard!
Unplug the device before clean-
ing.
DANGER
Ensure that no fluids will pene-
trate the product.
Leave the product exposed to
air for at least 1 minute after
cleaning/disinfecting.
Damage to the product due to
incorrect cleaning or inappropriate
cleaning/disinfecting agents!
CAUTION Use any commercial detergent
for surface cleaning.
Never immerse the product in
water or detergent.
Do not introduce any fluid into
the charging bays.
Clean the contacts in the charg-
ing bays, applying extreme care.
Wipe the shell of the product with a lint-free cloth
moistened with a commercial disinfectant for wipe
disinfection.
If necessary, after the appropriate exposure time,
wipe off any residues of the cleaning/disinfecting
agent with a lint-free cloth moistened with clean
water.
Dry the product with a clean, lint-free cloth.
Clean the contacts in the charging bay with isopro-
panol or ethyl alcohol and a cotton swab. Do not
use corrosive chemicals.
9