Melitta bar mc-cw Mode D'emploi page 30

Now you can refill fresh milk into the milk container. As
soon as product dispensing is shown again in the
display of the coffee machine ...
Insert the milk suction hose again into the
➃
container filled with milk and put it again into the
cooling chamber.
Switch on the device again and close the device
➁
door.
b) Cleaning the cup cabinet
After you have switched off the device and the
GB
warming area has cooled down:
Wipe plastic and stainless steel parts regularly
❍
with a wet cloth. Do not use any abrasive agents
or sharp objects.
If you are using a stainless steel care agent, it
❍
must be suitable for MELITTA
c) Defrosting the refrigerator
The refrigerator must be defrosted if an ice layer more
than 3 mm thick has formed or when you
decommission the device:
Open the device door and ...
➀
switch off the refrigerator.
➁
Leave the door open to allow warmth to enter it
❍
defrosting the ice layer. Pick up the melted water
with a soft cloth and then clean the cooling cham-
ber with a cleaning solution as described at a).
Leave the door of the device open if you do not
assume operation of the device right away. The
circulating air thereby prevents the formation of odors
and mold in the milk area.
® coffee machines.
10
➂ ➃
Warning!
Never attempt to break the ice layer loose with
hard or pointed objects. The surface of the
cooling chamber could be damaged in the process.