Switching Off; Anti-Shock Memory; Handling - MC Crypt CMP-980USB DJ-CD Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

q) SCRATCH
When the SCRATCH (vinyl) function is activated, you can scratch the track selected with the JOG wheel (2) in
play or pause mode like on a record player.
Press the button VINYL (22) to activate or deactivate this function. When this function is activated, the button
is lit.
Now turn the JOG wheel (2) to scratch.
r) Switching Off
Interrupt playback by pressing the PLAY/PAUSE button
Turn off the amplifier and/or mixing desks that might be connected.
Only then switch off the CD payer with the mains switch (1).

12. Anti-Shock Memory

The CD player is equipped with a digital anti-shock memory. This reduces the risk of interruptions during CD play-
back when the device is subjected to vibrations.
The anti-shock memory is loaded automatically when the audio data is read. The device needs a few seconds until
the memory is full to work optimally.
The saved data quantity corresponds to approx. 15 seconds of music playback. The anti-shock memory continu-
es to play the music in case of blows that would otherwise cause an interruption.

13. Handling

Never plug the mains plug into a mains socket immediately after the device has been taken from a cold to a
warm environment. The resulting condensation could destroy the device. Allow the device to reach room tem-
perature before connecting it. Wait until the condensation water has evaporated.
Never disconnect the mains plug from the mains socket by pulling on the cable. Only unplug it by pulling on
the plug.
Unplug the power supply if you do not use the device for an extended period of time.
For safety reasons, disconnect the mains plug from the mains socket in case of a thunderstorm.
Do not listen to excessively loud music for a long period of time. This may damage your hearing.
(10).
43

Publicité

Table des Matières
loading

Table des Matières