MC Crypt CMP-980USB DJ-CD Notice D'emploi page 32

(6) SINGLE/CONTINUE button
Use this button to switch the device between individual SINGLE-track playback and continuous (CONTINUE)
track playback.
(7) TAP button
Button for determination of the BPM (beats per minute).
(8) OUT/B button
Use the OUT/B button to program the end point of the play loop or quit the play loop by pressing it once
again.
(9) RELOOP button
Use this button to play the saved play loop.
(10) PLAY/PAUSE button
Use this button to start or pause playback. During playback the button is lit, during pause it flashes.
(11) CUE button
Use this button to reset to the CUE point and to start the CUE function.
(12) FOLDER/TRACK button
This button changes the function of the two SKIP buttons (13 and 14) at the main wheel. Select either track
or folder skipping
(13) SKIP button (backwards)
Use this button to select any track/folder. Press and hold the button to speed up the search.
(14) SKIP button (forwards)
Use this button to select any track/folder. Press and hold the button to speed up the search.
(15) PITCH slide control
With the PITCH slider, you can change the playback speed by +/-16%.
The slide control only has an effect if the pitch function has been activated using the PITCH (16)
button.
(16) PITCH button
Use this button to activate/deactivate the PITCH slide control (15).
(17) PITCH BEND + button
With this button you can temporarily increase the playing speed of the track by up to 16%.
(18) PITCH BEND - button
With this button you can temporarily decrease the playing speed of the track by up to 16%.
(19) Display
The display shows the most important settings and information.
32