EC Declaration of conformity
The design of the drum sanding machine LÄGLER PROFIT, for serial no. please see type plate, is developed, con-
structed and built according to the below mentioned EC regulations:
The following harmonized standards have been used:
DIN EN ISO 12100-1: Safety of machinery - Basic concepts, general principles for design - Part 1
DIN EN ISO 12100-2: Safety of machinery - Basic concepts, general principles for design - Part 2
DIN EN 60204-1: Safety of machinery - Electrical equipment of machines - Part 1
DIN EN 55014-1: Electromagnetic compatibility - Requirements for household appliances, electric tools and
similar apparatus - Part 1
DIN EN 55014-2: Electromagnetic compatibility - Requirements for household appliances, electric tools and
similar apparatus - Part 2
DIN EN 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits
DIN EN 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3: Limits
The following documents are provided:
• Overall plan of the machine with control circuit diagrams.
• Detailed complete plans to permit review of machine compliance with the underlying safety and health
requirements.
• A list of underlying requirements derived form EC directives, standards and specifications taken into account
in the design of the machine.
• A description of solutions for the prevention of risk emanating from the machine.
• A copy of the machine operating instructions.
Manufacturer:
Eugen Lägler GmbH · Maschinenbau
Im Kappelrain 2
D-74363 Güglingen-Frauenzimmern
Tel.: +49 - 7135 - 98 90-0 · Fax: +49 - 7135 - 98 90-98
E-Mail: info@laegler.com · http://www.laegler.com
EC DECLARATION OF CONFORMITY
Machinery (2006/42/EC from 17.05.2006)
Electrical equipment (2006/95/EC from 12.12.2006)
Electromagnetic compatibility (2004/108/EC from 15.12.2004)
8
Dipl.-Ing. (FH) Volker Wörner, design engineer
Person responsible of documents
Eugen Lägler GmbH, Maschinenbau
Güglingen-Frauenzimmern, dated 01.01.2010
english
33