afx light FOG3000T Manuel D'utilisation page 3

IMPORTANT NOTES
Before operation, please make sure the local mains power matches the rated input voltage. Please refer to the rating
label on the rear side of the unit.
Before filling the fog liquid, please unplug the unit from the mains.
In order to prevent short circuits, please don't let fog liquid flow into the inner part of the machine before filling, you
can also take out the liquid bottle and fill in the fog liquid outside the unit.
The fog machine must be installed on the ground. It's not allowed to slope the unit or place it upside down
After use, switch the fog machine off and unplug it from the mains
The fog machine isn't waterproof. If moisture or fog liquid enters inside the machine, you must unplug it immediately
from the mains and contact your dealer.
It's forbidden to spray directly towards persons. Keep far away from flammability and explosive objects
The fog spray is very hot, please keep a distance of at least 5 meters when using it
Please don't touch the surface of the fog machine during the use because the housing will reach 40-80°C
When the machine doesn't work, please check if the fuse is burnt out or not. If it is, replace it by an identical fuse,
find out the fault and restart the machine. But please note: the repair must be handled by professional.
DESCRIPTION
1. Security hook
2. Handle
3. Nozzle
4. Hanging bracket
5. Feet
6. Knob
7. Tube
© Copyright LOTRONIC 2014
8. DMX connectors
9. Power switch
10. Power cord
11. Overload protector
12. LCD display
13. Control panel
14. Remote connector
FOG 3000T Page 3