Before Installation - Toto CST484CEMF Manuel D'installation Et D'utilisation

■
Do not forcefully push or kick the toilet. This may cause injury or damage to the
product.
■
Do not drop hard objects in the toilet. This may cause damage or leaking.
■
Do not clean the toilet with harsh detergents or solvents which may cause damage
to the vitreous china.
■
Avoid the sudden introduction of hot water to a cold toilet. This may damage the
toilet.
■
Cold water in toilet tank may cause condensation depending on environmental
conditions.
■
If cracking occurs, discontinue use of the toilet. Failure to do so may cause
serious injury.
„ Read these instructions thoroughly before beginning work.
„ Please leave instructions for customers. These instruction contain maintenance
and warranty information.
„ If necessary, remove the existing toilet.
IMPORTANT!
Due to the powerful performance of our Cyclone, G-Max, E-Max and Power Gravity
flushing systems, they are not specified for back-to-back installations. The only
means of installing these toilets in a back-to-back situation is when the toilet drain
connections incorporate a WYE fitting. Please contact your builder or contractor
prior to this installation.
Double Combination WYE / 1/8 Bend
1. Distance between finished wall and the center of
the floor drain, "RI", must be 12" (305mm).
2. Water supply should be approximately 8" to 10" to
the left (facing the bowl) from the center line of closet
flange, and approximately 6" above the finished floor.
3. Using the provided
template, confirm
the installation
dimensions of the
Socket and the
mounting blocks.
WARNINGS

BEFORE INSTALLATION

YES
Finished Wall
Closet Flange
Supply Valve
Rough-In
Double Sanitary Tee / Sanitary Cross
NO
C/L
C/L
3
6" (152mm)
6-3/8" (160mm)