Pulling Loads - Stihl RT 4082 Manuel D'utilisation

When removing and attaching the
grass catcher box, the grass
catcher box release lever must
always be held in the released
position until the grass catcher box
has been fully removed or attached.
Removing the grass catcher box
Pull the grass catcher box release lever (1)
upwards and hold.
Remove the grass catcher box (2).
0478 193 9905 A - EN
Attaching the grass catcher box
Position grass catcher box (2) on both
snap-in hooks (3) on the rear panel.
● Actuate and hold the grass catcher box
release lever. ( 8.13)
Raise grass catcher box (2) to the stop.
● Release the grass catcher box release
lever and ensure that the grass catcher
box engages. ( 8.13)
If the machine is operated without
the grass catcher box or deflector
(accessory, not included in
standard equipment), the mowing
deck cannot be engaged and
the engine stops automatically.

12.11 Pulling loads

Risk of injury!
The driving characteristics of the
machine change when transporting
loads (e.g. longer braking
distance). The heavier the load, the
more the driving characteristics
change. Therefore select a lower
driving speed when pulling loads.
Avoid damage to the machine!
The maximum pulled load is
reduced on inclines.
● Before attaching loads, check the
braking function. ( 12.5)
87