Checking The Engine Oil Filling Level; Changing The Engine Oil; Fuel Cock - Stihl RT 4082 Manuel D'utilisation

Insert cutting height adjustment rod (3)
into the bore in mowing deck mounting (4).
Insert retaining pin (1).
● Install the mowing deck. (
● Install the discharge chute. (
● Attach the grass catcher box. (
14.13 Checking the engine oil filling
level
● Park the machine on a flat, level
surface.
● Stop the engine. ( 12.3)
● Engage the parking brake. (
● Allow the engine to cool down.
● Open the storage compartment.
( 14.11)
0478 193 9905 A - EN
● Check the filling level as per the engine
instruction manual – top up the engine
oil if necessary. (

14.14 Changing the engine oil

Danger of burns due to hot
engine oil!
Allow the engine to cool down
before topping up the engine oil or
before changing the oil.
Information regarding the engine oil and oil
capacity can be found in the engine
instruction manual.
Dispose of used oil in conformance with
statutory requirements.
Oil change interval:
The recommended oil change intervals
can be found in the engine instruction
manual.
Draining the engine oil:
● Stop the engine and allow it to cool
down (warm to the touch). (
13.2)
● Engage the parking brake. (
14.6)
● Remove the discharge chute. (
12.10)
● Open the storage compartment.
( 14.11)
● Drain the engine oil via the oil drain
valve (above the right-hand rear wheel)
as per the engine instruction manual.
Topping up engine oil:
● Top up the engine oil as per the engine
instruction manual – use a suitable
8.10)
funnel and hose (not included in
standard equipment).
● Close the storage compartment
( 14.11) and install the discharge
chute. (
14.14)
12.3)
8.10)
14.5)
14.6)

14.15 Fuel cock

The flow of fuel in the fuel line is
enabled or interrupted by
opening or closing the fuel cock.
The fuel cock is located behind
the left-hand rear wheel.
● Stop the engine. ( 12.3)
● Engage the parking brake. (
The fuel cock (1) is opened and closed by
turning control valve (2).
8.10)
103