Dometic DM 50NTE D Instructions De Montage Et De Service page 18

Installation
• The cut-out dimensions W x D x H are:
– DM50NTE D: 570 x 524 x 438 mm (22.44 x 20.63 x 17.24 in)
– DM50NTE F: 570 x (504 + d) x 438 mm (22.44 x (19.84 + d) x 17.24 in)
d is the thickness of the hotel's own decor
• The clearance between the minibar's back and the furniture wall should be
approx. 15 mm (0.59 in).
• The ventilation openings for the chosen alternative have to be produced as
shown in fig. 7, page 6.
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
6.2 Pressing out the ventilation opening
fig. 8, page 7 – fig. 9, page 7
➤ Produce a ventilation opening of 75 x 550 mm (2.95 x 21.65 in) in the bottom of
the furniture into which you place the minibar.
Measure the distance of 504 mm (19.84 in) from the minibar's door front
excluding any own decor.
6.3 Mounting the minibar into a piece of furniture
No in
fig. 0, page 7
1
2
1. Fasten the minibar with the four screws ø4 x 45 mm (ø0.16 x 1.77 in) (fig. 0 1,
page 7).
2. Insert the four plugs (fig. 0 2, page 7) into the boring.
6.4 Connecting the minibar electrically
DM50NTE D/F UPOE
➤ Connect the Ethernet port of the minibar to an Ethernet port that works accord-
ing to the UPOE specification.
18
DM 50NTE D, DM 50NTE F, DM 50NTE UPOE
Description
Screw ø4 x 45 mm (ø0.16 x 1.77 in)
Plug
EN