Sensor Modes; Quick Sensor; Covering Foods - Electrolux EI24MO45I Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The sensor is a semi-conductor device that detects
the vapor (moisture and humidity) emitted from the
food as it heats. The sensor adjusts the cooking times
and power level for various foods and quantities.
Using Sensor Modes:
1. After oven is plugged in, wait 2 minutes before
using Sensor Modes.
2. Be sure the exterior of the cooking container
and the interior of the oven are dry. Wipe off any
moisture with a dry cloth or paper towel.
3. The oven works with foods at normal storage
temperature. For example, popcorn would be at
room temperature.
4. Any Sensor Modes selection can be programmed
with More or less time adjustment. See page 25.
5. More or less food than the quantity listed in the
chart should be cooked following the guidelines
in any microwave cookbook.
6. During the first part of any sensor cooking or reheat-
ing, food name will appear on the display. Do
not open the oven door or press STOP/CLEAR
during this part of the cycle. The measurement of
vapor will be interrupted. If this occurs, an error
message will appear. To continue cooking, press
the STOP/CLEAR pad and cook manually.
When the sensor detects the vapor emitted from
the food, remainder of cooking time will appear.
Door may be opened when remaining cooking
time appears on the display. At this time, you may
stir or season food, as desired.
7. If the sensor does not detect vapor properly when
popping popcorn, the oven will turn off, and the
correct time of day will be displayed. If the sensor
does not detect vapor properly when cooking
other foods, ERROR will be displayed. Follow the
instructions.
8. Check food for temperature after cooking. If addi-
tional time is needed, continue to cook manually.
9. Each food has a cooking hint. Press user pref pad
when the HELP indicator is lighted in the display.

Covering Foods:

Some foods cook better when covered. Use the cover
recommended in the food charts.

Sensor Modes

1. Casserole lid.
2. Plastic wrap: Use plastic wrap recommended for
microwave cooking. Cover dish loosely; allow
approximately
1
/
inch to remain uncovered to
2
allow steam to escape. Plastic wrap should not
touch food.
3. Wax paper: Cover dish completely; fold excess
wrap under dish to secure. If dish is wider than
paper, overlap two pieces at least one inch
to cover.
Be careful when removing any covering to allow
steam to escape away from you.

Quick Sensor

You can cook or reheat many foods by pressing a
Quick Sensor pad (fresh veggies, frozen veggies,
popcorn, baked potato and sensor reheat) and
START. You don't need to calculate cooking time or
power level.
Suppose you want to cook 2 baked potatoes.
Procedure
Step
Press baked potato pad.
NOTES
1. Quick Sensor can be programmed with More
or less time adjustment. See page 25.
2. The final result will vary according to the food
condition (e.g. initial temperature, shape,
quality). Check food for temperature after
heating. If additional time is needed, continue
to heat manually.
15
Press
baked
potato
E

Publicité

Table des Matières
loading

Table des Matières