Replacing The Battery; Guarantee; Technical Specifications; Www.microlife.com - Microlife IR 1DE1 Mode D'emploi

12. Replacing the battery

This device is supplied with one lithium battery, type CR2032.
Replace with a new CR2032 battery when the flashing battery symbol
appears on the display. Remove the battery cover by sliding it in the
direction shown. Remove the battery and replace with a new one.
Batteries and electronic devices must be disposed of in
accordance with the locally applicable regulations, not with
domestic waste.

13. Guarantee

Subject to the following conditions this high-quality measuring
device is covered by a 2 year guarantee from the date of purchase.
Warranty claims must be lodged within the guarantee period.
This product was manufactured with the utmost of care according
to international quality standards. Should you have reason for
complaints despite this, please send the device, accompanied by the
completed guarantee card with dealer's stamp as well as original
proof of purchase directly or through your medical supplier to your
closest Microlife Distributor.
Damage resulting from incorrect use is not covered by the guarantee.
Battery and packaging are excluded from the guarantee. Claims
beyond this, including claims for damages, are excluded.
Name and adress of responsible dealer:

14. Technical Specifications

Type: Digital Infrared Ear Thermometer IR 1DE1
Measuring range: 0 - 100.0 °C / 32.0 - 212.0 °F
Accuracy:
Laboratory:
±0.2 °C, 32.0 ~ 42.2 °C / ±0.4 °F, 89.6 ~ 108.0 °F
±1 °C, 0 ~ 31.9 °C, 42.3 ~ 100.0 °C /
±2 °F, 32.0 ~ 89.5 °F, 108.1 ~ 212.0 °F
11
Display:
Accoustic:
Memory:
Backlight:
Operating cond.:
Storage cond.:
Automatic
Switch-off:
Battery:
Battery lifetime:
Dimensions:
Weight:
IP Class:
Standards:
Expected
service life:
This device complies with the requirements of the Medical Device
Directive 93/42/EEC Class IIa. Technical alterations reserved.

15. www.microlife.com

Detailed user information about our thermometers and blood pressure
monitors as well as services can be found at www.microlife.com.
EN
Liquid Cristal Display, with indicating unit 0.1 °C/°F
a. The unit is turned ON and ready for the
measurement: 1 short «bi» sound.
b. Complete the measurement: 1 long beep (1sec.),
if the reading is less than 37.5 °C / 99.5 °F,
10 short «beep» sounds, if the reading is equal
to or greater than 37.5 °C / 99.5 °F.
c. System error or malfunction: 3 short «bi» sounds.
a. Auto-Display the last measured temperature
when switched on.
b. 12 readings recall in the memory mode.
• The display will be lighted GREEN for 4 sec.,
when the unit is turned ON.
• The display light will be GREEN for 5 seconds,
when a measurement is completed with a
reading less than 37.5 °C / 99.5 °F.
• The display light will be RED for 5 seconds,
when a measurement is completed with a
reading equal to or higher than 37.5 °C / 99.5 °F.
10 - 40 °C / 50.0 - 104 °F;
15 - 95 % relative maximum humidity
-25 - + 55 °C / -13 - +131 °F;
15 - 95 % relative maximum humidity
Approx. 1 minute after last measurement.
Auto-off if START button is pressed.
1x CR2032 battery
approx. 1000 measurements (using a new battery)
153 mm (L) x 31 mm (W) x 20 mm (H)
53 g (w/ battery), 50 g (w/o battery)
IP21
EN 12470-5; ASTM E1965; IEC 60601-1;
IEC 60601-1-2 (EMC); IEC 60601-1-11
5 years or 12000 measurements
12