Remote Control Unit; Preparing The Appliance For Operation - Unold 86840 Notice D'utilisation

REMOTE CONTROL UNIT

PREPARING THE APPLIANCE FOR OPERATION

1. Remove all packaging materials and transport safeguards. Keep the packag-
ing material, such as plastic bags or Styrofoam away from small children
- danger of suffocation!
2. Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
3. Plug the power plug into an electrical outlet.
4. Press the ON/OFF button once to switch on the appliance.
5. Note: Each button entry is confirmed with a signal tone.
20
1. Carefully slide the cover of the battery com-
partment downward.
2. Insert the batteries. In this regard, strictly
ensure that the polarity is correct. For orientation,
there are appropriate markings in the battery com-
partment.
3. Always use type AAA batteries.
4. Close the cover.
5. If you adjust the appliance with the remote
control unit, ensure that you always hold it in the
direction of the fan while you are making the set-
tings.
6. The designations on the remote control unit are
identical to the designations of the buttons on the
appliance.
7. To avoid damage, never allow the remote con-
trol unit to fall from a significant height.
Copyright UNOLD AG | www.unold.de