Setting Up The Printer; Loading The Battery - Brady BMP71 Guide Rapide

26

Setting Up the Printer

Setting Up the Printer
Power is supplied to the BMP71 printer through a battery or through an AC power adapter
(included).

Loading the Battery

1. Holding the printer by the
handle, tip it onto the back
side.
Unloading the Battery
1. Tip the printer onto its
back side.
Adapter
The printer can be powered through an AC power adapter (included). When the adapter is
plugged in, it is also charging the battery.
1. Insert the round end of
the adapter cable...
BMP71 Quick Start Guide
2. With the battery label
facing outward, insert
battery tabs into bottom
of battery compartment.
2. With one hand over the battery to ease its release, use
your other hand to slide the release latch to the right.
2. ...into the plug-in port on the back of the printer. Plug the
other end of the cord into an electrical outlet.
3. Pivot the battery
backward until it snaps
into place.
English
11/12/09