34
THE ZOEMER (BUZZER)
FUNCTION
When the buzzer function is activated
you can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
THE DROOGTIJD (TIME)
FUNCTION
Operates only with Tijd (Time pro-
gramme) . Let the user to set special
time of drying programme from mini-
mum 10 min. to maximum of 2 hours (in
10 min. steps).
THE STARTUITSTEL (DELAY
START) FUNCTION
Let to delay the start of a drying
programme from minimum of
30 minutes to maximum of 20
hours.
1. Set the drying programme and
functions.
2. Push the Startuitstel (Delay start)
button again and again until the
necessary time of the delay come
into the view on the display (e.g.
if the programme has to start af-
ter 12 hours.)
3. To activate the Startuitstel (Delay
start) function, push the Start/Pauze
(Start/Pause) button. The time to
start decreases on the display.
CHILD LOCK FUNCTION
B
A
The child lock can be set to prevent the
children to play with the appliance. The
child lock function locks all push but-
tons and the programme dial. To acti-
vate the child lock function push the A
and B buttons at the same time until
the symbol
come into view on the
display. To deactivate push again the
above buttons until the symbol go out
of view.
You can activate the child lock function:
• before you push the Start/Pauze
(Start/Pause) button - the appliance
cannot start
• after you push the Start/Pauze (Start/
Pause) button - all the push buttons
and the programme dial are deacti-
vated
STARTING A PROGRAMME
To activate the programme push the
Start/Pauze (Start/Pause) button. The
LED above the push button changes
the colour to red.
CHANGE A PROGRAMME
To change a programme, turn the pro-
gramme dial to
programme again.
AT THE END OF PROGRAMME
When the drying cycle is complete, the
symbol flashes on the display. If the
Zoemer (Buzzer) function is on, an
acoustic signal sounds intermittently for
about one minute.
(off) and then set the