Troubleshooting Procedure - SLAT SON 24V 6A MS40 RACK Notice D'utilisation

The indicator light are not illuminated

Check the mains voltage

Check the primary fuse F1 on the power and control board

Check that the flat ribbon cable is correctly connected
The output indicator light is yellow

Check the output fuses F1 and F2

Check the auxiliary fuses F1 to F3
The battery indicator light is yellow

Check that the nominal battery voltage is ok with the sytem voltage

Check the polarity connections of each battery and on the rack battery connector

Check the battery connections and the battery fuse connections

Check the voltage of each battery block ( >5,7V / >10,8V)

Check that the battery is approuved (see Pr 1.2.5)

If the mains is present, check that the output current is <6A

The internal battery resistor may be too high: replace the battery
The mains indicator light is yellow

Check the mains voltage

Check the primary fuse F1 on the power and control board

Check that cooling of the rack is sufficient and that the ambient temperature is < 45°C
For additional technical assistance, contact the SLAT hotline
or contact SLAT After-Sales Service to obtain an RMA (Return Material Authorisation) number.
Returns are not accepted without an RMA number.

8 Troubleshooting procedure

+ 33 (0) 4 78 66 63 70
For return requests, visit our website
http://www.slat.fr/formulaireRMA.php
33