Block Diagram; Installation Of The Equipment; Mounting - SLAT SON 24V 6A MS40 RACK Notice D'utilisation

1.4 Block diagram

It is advised to secure the battery with a fuse with low resistance. For its size, refer to chapter 7.

2.1 Mounting

The charger has to be installed in a 19"rack that complies to Class 3k5 of EN60721-3-3:1995 +A2:1997
and IP30 of EN60529:1991+A1:2000.
Auxiliary outputs board
Main outputs board
Mother board
L
LEDs Daughter
Board
Temperature sensor
Figure 2 : Block diagram

2 Installation of the equipment

Figure 3 : Mounting the equipment
Output 5
Output 4
Output 4
Output 2
Output 1
Alarm outputs
Battery
28