Enclosure 1: Installation And Operating Instructions - WLD-TEC Fuego SCS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Enclosure 1: Installation and Operating Instructions

64
• Move forward through the installation
instructions by pushing the function knob (1).
• Observe the operating instructions carfully!
• Use correct nozzle!
• For natural gas use nozzle N, 08!
• For propane / butane gas use nozzle P, 06!
• Tighten all gas connections (left-hand
thread) with a wrench.
• Do NOT seal up the gas conection of the
burner with Teflon tape or similar.
• Maximum inlet pressure natural gas: 27 mbar.
• Maximum inlet pressure propane / butane
gas: 57.5 mbar.
• To open gas supply: turn knob
counterclockwise.
• To open air intake: pull knob outwards and
turn counterclockwise.
• General burner operations by pushing &
turning.
• Switching on & off / resetting by long push.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fuego scs pro8.200.0008.204.000

Table des Matières