Makita XCV05 Manuel D'instruction page 8

Connecting vacuum cleaner body and hose
► 1. Hose cuff 2. Vacuum cleaner body
Connecting extension wand and nozzle
1
► 1. Extension wand 2. Free nozzle 3. T-shape nozzle
NOTE: The free nozzle can be attached directly to
the hose.
Connecting hose and extension wand
► 1. Hose 2. Extension wand 3. Free nozzle
NOTE: The free nozzle can be attached to the hose
directly.
2
1
2
3
Installing filter bag
1
CAUTION:
Always use the vacuum cleaner with the filter bag
properly installed. Otherwise the vacuumed dust
or particles may be exhausted from the cleaner
and they may cause respiratory disease to the
2
operator.
NOTICE:
When the filter bag is already full, replace
with new one. Continuous use with the filter bag full
results in reduced suction power.
1. Unlock the latch by lifting the bottom side. Push
the grooved area to lift the front latching side. Pull the
latch to open the lid.
2
3
► 1. Hook 2. Lid
2. Insert the filter bag into the slit on the upper side of
the room as illustrated.
1
2
► 1. Slit 2. Filter bag / Dust bag
8 ENGLISH
Do not use a damaged filter bag.
1