Makita XCV05 Manuel D'instruction page 6

Adjusting belts
The tightness of the shoulder belts, upper and lower
belts can be adjusted. Put your arms through the shoul-
der belts first then fasten the upper and lower belts.
To tighten, pull the end of the strap as illustrated. To
loosen, pull up the end of the fastener.
Shoulder belts
► 1. Strap 2. Fastener
Upper belt
► 1. Strap 2. Fastener
Lower belt
1
► 1. Strap 2. Fastener
1
2
2
1
2
Carrying hook
Always grab the carrying hook when handling the vac-
uum cleaner body.
► 1. Carrying hook
Hose band
Hose band can be used for holding the wand or free
nozzle.
To secure the wand to the vacuum cleaner body, pass
the hose band through the slot on the body. You can
attach the hose band on either side.
► 1. Hose band 2. Slot 3. Extension wand
To hold the free nozzle on the lower belt, pass the hose
band through the loop on the lower belt.
6 ENGLISH
1
1
2
3