Sangean ATS-909X Mode D'emploi page 15

SETTING WORLD TIME
The ATS-909X is programmed to provide the correct time for 42
cities worldwide. Each cities time is correct once your own city time
GB
zone is inserted into the system.
Once you have inserted the correct time for your city as described
previously push Home/World Time Selection button. Home display
will begin to flash. Using Rotary Tuning Knob to select your city or
any designated city that shares your same time zone and press
Enter Selection button. Displayed city will remain for about 2
seconds and disappear. To recall home city, press Home/World
Time Selection button again. Once above is completed it is only
necessary to press World/Home Time Selection button and use
Rotary Tuning Knob to get the correct time in any city displayed.
If you would like to display and monitor another world city/time zone
rather than your own home time press Home/World Time Selection
button until World flashed. Rotate Rotary Tuning Knob to select
World city/Time zone you would like to display and monitor. Press
Enter Selection button. New time will appear and remain in display.
World city name will disappear from display within 2 seconds.
4