Sangean ATS-909X Mode D'emploi page 14

USING EXTERNAL AC ADAPTER
The ATS-909X can be used on AC by using the adapter included
with this radio. When connected, the batteries within the radio will
be automatically disconnected.
SETTING THE CLOCK (REAL TIME)
In keeping with world wide short wave protocol time is programmed
on a 24 hour basis. (Greenwich Mean Time)
The clock can be set with the power on or off. The clock display will
start to run as soon as batteries are inserted. Press the Time Set
button. Display time digit will be blank and Home display will flash.
Use digit buttons to enter the actual time in hours and minutes. (Don'
t forget time must be entered on a 24 hour basis). Once entered,
hours and minutes will be displayed in display. To start clock, press
Enter Selection button.
To cancel an incorrect entry, press the CANCEL button. One digit is
deleted every time the button is pressed.
3