Troubleshooting; Variants - DS Produkte VC-S1001B Mode D'emploi

Storage
You should store the device and all accessories in a cool, dry place which is out of the
reach of children and animals.

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the pro-
blem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem Potential cause/solution/tips
•
The device is
not working. •
•
•
•
•
The suction
power is
•
weak.
•
•
The device
emits dust
•
when vacu-
uming.
•
An unpleasant
odour deve-
lops when •
vacuuming.
•

Variants

Product number: 07661 (violet)
07662 (dark green)
07622 (orange)
07623 (limegreen)
Has the mains plug been correctly inserted in the socket?
Correct the position of the mains plug.
Is the socket defective? Try another socket.
Check the fuse for your mains connection.
Is the dust bin too full? Empty the bin.
Are the fi lters heavily laden with dirt? Clean them.
Are the fi lters damaged or can they no longer be adequately clea-
ned? Contact customer service.
Is the nozzle in use plugged or is the suction hose plugged? Turn
the device off, pull the mains plug out of the socket and remove
the obstruction.
Is the fl oor nozzle or the turbo nozzle dirty? Remove the dirt.
Is the dust bin full? Empty the dust bin.
Have the dust fi lters been inserted correctly? Push the dust fi lter
fi rmly into the dust bin so that it rests up against the housing wall
on all sides.
Are you using the device for the fi rst time? An odour often deve-
lops when using new devices for the fi rst time. The odour should
disappear once you have used the device a few times.
Are the fi lters heavily laden with dirt? Clean them.
Is the dust fi lter damaged or can it no longer be adequately clea-
ned? Contact customer service.
19 EN