SilverCrest SAB 160 B2 Mode D'emploi page 135

NOTE
When you are not receiving any RDS or PTY information, "PS NONE" or "PTY
►
NONE" is shown on the display
INVOL – switch-on volume
♦ Turn the multi-controller
be set when turned on.
REC – recording format
♦ Turn the multi-controller to set the record format for recording on SD/MMC
and/or USB data media, MP3 (MP3 fi les) or WMA (Windows Media Audio).
SUBW – subwoofer
You can connect an active external subwoofer to produce a more powerful bass
eff ect.
Turn the multi-controller to enable the bass eff ect (SUBW ON) or disable it
♦
(SUBW OFF).
ADJ – time of day
NOTE
► The device has an RDS-controlled clock. The clock sets itself automatically
when the EON function is enabled and continues to run when the stereo is
switched off . If you do not receive any RDS signal, you can set the time of
day manually.
♦ Turn the multi-controller to the right to set the hours and to the left to set the
minutes.
TAVOL – volume for traffi c radio
♦ Turn the multi-controller to set the volume level at which traffi c reports are to
be played back.
EON – information from other stations
When the EON function is switched on, the radio switches to traffi c radio or PTY
groups if the TA or PTY function has been activated.
Turn the multi-controller in order to switch the EON function on (EON ON) or
♦
off (EON OFF).
AUTO DIM – display illumination
♦ Turn the multi-controller to perform the following settings:
AUTO DIM: the display illumination will adjust automatically depending on the
MAN DIM: the display illumination can be set in two stages (H = High and L = Low)
SAB 160 B2
3 to set the volume level at which the device is to
lighting conditions.
by turning the multi-controller.
.
6
GB
131