ADEO Services YT4334-01 Notice De Montage Et D'entretien page 43

Service
Have your power tools serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that safety of the power
tool is maintained.
Chain saw safety warnings
1. Keep all parts of the body
away from the saw chain when
the chain saw is operating.
Before you start the chain saw,
make sure the saw chain is not
contacting anything. A moment
of inattention while operating chain
saws may cause entanglement of
your clothing or body with the saw
chain.
2. Always hold the chain saw
with your right hand on the
rear handle and your left hand
on the front handle. Holding
the chain saw with a reversed hand
configuration increases the risk of
personal injury and should never be
done.
3. Hold the power tool by
insulated gripping surfaces
only, because the saw chain
may contact hidden wiring
or its own cord. Saw chains
contacting a "live" wire may make
exposed metal parts of the power
tool "live" and could give the
SAFETY INSTRUCTIONS
43
operator an electric shock.
4. Wear safety glasses and
hearing protection. Further
protective equipment
head, hands, legs and feet
is recommended. Adequate
protective clothing will reduce
personal injury by flying debris or
accidental contact with the saw
chain.
5. Do not operate a chain saw in
a tree. Operation of a chain saw
while up in a tree may result in
personal injury.
6. Always keep proper footing
and operate the chain saw
only when standing on fixed,
secure and level surface.
Slippery or unstable surfaces such
as ladders may cause a loss of
balance or control of the chain saw.
7. When cutting a limb that is
under tension be alert for
spring back. When the tension
in the wood fibres is released the
spring loaded limb may strike the
operator and/or throw the chain
saw out of control.
8. Use extreme caution when
cutting bush and saplings. The
slender material may catch the saw
chain and be whipped toward you
or pull you off balance.
9. Carry the chain saw by the front
EN
for