Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BRS-FP/BRS-FPi
12 Disposal
To correctly dispose of the product, it must first be disassembled. When disposing of the system, local regulations, laws,
provisions, standards and guidelines must be observed.
11 Disassembly on page EN-25
12.1 Materials
This product is mainly made of metallic materials that can be melted in steel and iron works and are thus almost infinitely
recyclable. The plastic materials used are labeled in preparation for their sorting and separation for later recycling.
12.2 Consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These substances must be
stored, transported and disposed of in suitable containers. Observe the relevant local regulations and disposal instructions
in the safety data sheets specified by the manufacturer of the consumables. Contaminated cleaning tools (brushes, rags, etc.)
must also be disposed of in accordance with the information provided by the consumables' manufacturer.
12.3 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle packaging
materials is always considered during their selection.
BAL.0028.0 • 2021-10-21
12 Disposal
EN - 26
Publicité
Table des Matières
