Blueair 400 Série Guide D'utilisation page 5

English
Grounded
wall outlet
Plug
Settings*
Plug the power cable firmly and completely into the recessed power cord
socket located at the bottom of the unit and plug the other end into a
grounded wall outlet or power strip. Turn on your Blueair unit. The blue
light-emitting diode indicates that the unit is working. Set the control knob to
maximum speed, which is recommended for fast initial cleaning, daytime use,
or very polluted air. After a few minutes, adjust the control to the desired
speed. Minimum speed is generally recommended for nighttime use.
* For Blueair E Series units, please refer to the separate sheet included with your unit for instruc-
tions on settings.
Recessed power
cord socket
Power cable connector
Blueair 400 Series 5