BM2 BIEMMEDUE SUPER 150 Manuel D'emploi Et D'entretien page 24

GB
mains, open the water supply cock and start the water cleaner
letting the water jet come out from the H.P. pipe without washing
lance until the hydraulic circuit has been completely rinsed
Descaling washing must be carried out every 100 working hours if
water is characterized by medium total hardness values (25-30 French
degrees), every 50-60 working hours if water presents a higher total
hardness.
TRANSPORTING AND MOVING THE WATER CLEANER
The packaging can be easily moved mechanically (platformtruck,
overhead crane etc.). Just check that grip points are those preset on
the wooden base
Packagings can be laid one on top of the other after reading the in-
structions and warnings placed on the packaging itself. Do not in any
case form unstable piles
MOVING
To move the water machine use front handles and let it run on its
wheels.
Attention
Never try to lift the water cleaner manually. Doing so
could result in physical injury.
Attention
Before moving the machine:
• Turn it off as indicated before
• Disconnect electricity by pulling out the plug
• Close the water supply cock and unscrew the water en-
trance pipe.
DISPOSAL
At the end of its useful life, you have to scrap and dispose of this
product by taking it to a local differentiated waste collection center in
conformity to law.
Before scrapping, check the serial number plate on the machine: if
it has the symbol , it means that disposal is regulated by EU Directive
2003/96 (Waste Electrical and Electronic Equipment, WAEE).
The user must inquire about the local electrical and electronic
waste collection system and follow its instructions.
Illegal disposal of this product with normal domestic waste can se-
riously harm the environment and health and is subject to administrative
penalties.
24