Sennheiser HS 2 Notice D'emploi page 7

HS 2
The HS 2 is a condenser omni-directional headmic fitted with a steel wire
cable and a special connector. It fulfils the most stringent demands on
sound quality and is extremely rugged. The HS 2 is suitable for both vocal
and speech applications in all areas of live work.
HS 2 (anthracite):
HS 2-1 (beige):
HS 2-5 (
anthracite
HS 2-1-5 (beige):
Features
The frequency response curve has been optimised for close-miking.
The treble response can be adapted to different requirements via
accessories.
Largely insensitive to penetration of sweat due to the patented
tandem diaphragm. This design comprises two individual diaphragms
installed on both sides of the diaphragm ring. The bottom diaphragm
is electrically active and forms the capacitive electroacoustic transducer
together with the back plate. The top diaphragm is passive and seals
the microphone against sweat. Robust sealing of the housing is
ensured by a silicone ring.
Cat. No. 005336
Cat. No. 005337
): Cat. No. 500218 (open-ended cable)
Cat. No. 500219 (open-ended cable)
top "umbrella" diaphragm
(seals the capsule against
moisture)
bottom (active) diaphragm
7