Bluetooth - Ibiza sound HYBRID8VHF-BT Manuel D'utilisation

Where the MAINS plug or an appliance couples is used as the disconnect device, the disconnect device shall remain
readily accessible.
If a switch is used to disconnect the device, the switch and its function must be clearly identified and remain easily
accessible.
Restrictions of Use
-
As the product contains a transmission/reception system of VHF signals, it is exclusively meant for professional
use. The user of the product is fully responsible for the use he makes of the product. The distributor cannot be
held responsible for an eventual misuse by the user of the product.
- The symbol "!" that appears on the wireless transmitter, the packaging, the manual and on the product means that
the product is allowed for use only in some countries of the European Community (FR – BE – PT – D – NL – LU –
GR – SP – RO).
FEATURES
 BLUETOOTH
 Built-in amp
 Built-in USB MP3 / WMA player
 Built in VHF microphone receiver
 Remote Control
 Treble & Bass control
 Mic VOL & ECHO controls
 Master VOL control
 MIC & LINE inputs
 Built-in rechargeable battery
 Rectractable trolley & wheels (only model HYBRID10VHF-BT)
 Power source: 13Vdc, 1A via supplied mains adaptor
POWER SUPPLY: BATTERY & AC OPERATION
1. Built-in rechargeable battery and AC power. Prior to using this system for the first time, please insert the DC lead
into the DC socket of the player and plug the other end on a suitable wall outlet. Make sure that the "CHARGE
INDICATOR" is ON 10 hours continuously.
2. Please recharge once every 6 months if you don't use the system for a longer period of time.
NOTE: Please shut down the power switch after you have finished using the system.
TO PLAY MP3/WMA MUSIC
1. Switch power source to ON.
2. Insert a USB stick or an SD card
3. Select USB via the MODE button
4. Select a title via the  or  buttons and press►
TO PLAY LINE IN MUSIC
1. Insert an RCA plug into the LINE IN socket.
2. Insert a wired microphone into MIC1 or MIC2 and.
3. Adjust the MIC VOL, ECHO, MASTER VOL.
TO USE VOX FUNCTION
Activate the VOX function by setting switch VCV to ON. When VOX function is enabled, the music level will decrease
when somebody talks into one of the microphones. The music level becomes normal when the user stops talking into
the microphone. If you want to disable this function, set this switch to off position
BLUETOOTH FUNCTION
1. Press the MODE button until Bluetooth is displayed.
2. Switch on your Bluetooth device and activate the Bluetooth connect function
3. Select BLUETOOTH in the list of found devices
4. You are ready to play your music
©Copyright LOTRONIC 2015 4