Installing Updates For The Home Connect Software - Bosch KGN Série Notice D'utilisation

Activating the cameras
If the refrigerator is connected to the
home network (WLAN) and to the Home
Connect app, you can activate the
cameras:
Press the alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Keep pressing button + refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows CA and the freezer
compartment temperature display
shows OF.
Press button + freezer compartment.
3.
The freezer compartment
temperature display shows On and
the energy saving mode display
lights up.
The cameras are activated.
Notes
If the cameras are activated and the
■
refrigerator contents are interrogated
frequently via the app, this will result
in increased data transfer.
Uploading the photos takes up to
■
three minutes.
Various external factors in the home
■
network and Internet cause transfer
problems and pictures to be
discarded. This has no effect on the
basic functions of the appliance.
Deactivating the cameras:
Press the alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Keep pressing button + refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows CA and the freezer
compartment temperature display
shows On.
Press button - freezer compartment.
3.
The freezer compartment
temperature display shows OF.
The cameras are deactivated.
Resetting Home Connect settings
If there is a problem when trying to
establish a connection or if you would
like to register the appliance in a
different home network (WLAN), the
Home Connectsettings can be reset:
Press the alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button + refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows rE and the freezer
compartment temperature display
shows OF.
Press button + freezer compartment.
3.
Freezer compartment temperature
display shows an animation for 15
seconds.
Then the freezer compartment
temperature display shows OF.
The energy saving mode display
does not light up.
The Home Connect settings have
been reset.
Installing updates for the
Home Connect software
The refrigerator checks at regular
intervals whether updates are available
for the Home Connectsoftware.
If an update is available, the refrigerator
compartment temperature display
shows "UP".
Pressing any button will reset the
display to the set temperature.
Installing the update:
Press the alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button + refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows UP and the freezer
compartment temperature display
shows OF.
Home Connect en
43