en Operating the appliance
1
Operating the
appliance
Switching on the appliance
p l i a n c e
O p e r a t i n g t h e a p
Press the )* button.
1.
The appliance begins to cool.
Warning signal, flashing temperature
display on the freezer compartment
and lit button alarm off indicate that
the freezer compartment is still too
warm.
Press the alarm off button.
2.
The warning signal switches off.
Setting the required temperature.
3.
~ "Setting the temperature"
on page 38
Operating tips
After the appliance has been
■
switched on, it may take several
hours until the set temperatures
have been reached. Do not put in
any food until the selected
temperature has been reached.
The fully automatic NoFrost system
■
ensures that the freezer
compartment remains free of ice.
Defrosting is not required.
The sides of the housing are partly
■
heated slightly. This prevents
condensation in the area of the door
seal.
If the freezer compartment door
■
cannot be immediately re-opened
after it has been closed, wait until the
resulting low pressure has
equalised.
38
Switching off and
disconnecting the appliance
Switching off the appliance
Press the )* button.
■
The appliance no longer cools.
Disconnecting the appliance
If you do not use the appliance for a
prolonged period:
Press the )* button.
1.
The appliance no longer cools.
Pull out the mains plug or switch off
2.
the fuse.
Clean the appliance.
3.
Leave the appliance open.
4.
Setting the temperature
Recommended temperature
Refrigerator compartment:
Freezer compartment:
Refrigerator compartment
Keep pressing the button - + until the
■
display indicates the required
temperature.
Freezer compartment
Keep pressing the button - + until the
■
display indicates the required
temperature.
+4 °C
–18 °C