Safety Warnings - Marmitek GSM Guard 300 Mode D'emploi

SAFETY WARNINGS

• The wiring of your electrical installation is live (230 V) and extremely dangerous. Never
connect the module when plugged into the mains. Always turn off the mains switch
before starting the installation.
• To prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a
bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright
light sources.
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case of
improper usage of the product or when the product is used for purposes other than
specified. Marmitek does not accept responsibility for additional damage other than
covered by the legal product responsibility.
• Adapters: Only connect the adapter to the mains after checking whether the mains
voltage is the same as the values on the identification tags. Never connect an adapter
or power cord when it is damaged. In that case, contact your supplier.
• Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together. Remove
the batteries when you are not using the system for a longer period of time. Check the
polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can
cause an explosion.
Introduction
Congratulations on buying the Marmitek GSM Guard 300! You can now easily secure your
(holiday) home, caravan or other object. The Marmitek GSM Guard 300 immediately warns
you in case of danger, by sending a text message to the mobile phone number entered. You
are no longer dependant on a land line.
Set content
• 1 Marmitek GSM Guard 300 module
• 1 antenna
• 1 adapter
• 2 door/window sensors WDS300 with accessories
• 1 (wired) siren B300
• user manual (4 languages)
Requirements for installation
• 1 SIM card (pre-paid) with phone number, PIN and PUK
• mains voltage where you want to install the Marmitek GSM Guard 300 module
• a mobile phone to test your GSM Guard 300 and SIM card to unlock the PIN
• screwdriver and/or drill to place the module and/or sensors on the wall, if necessary
GSM GUARD 300 3