Hazard Sources - Bartscher 7180 Mode D'emploi

CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
To avoid them please follow the instructions very carefully and proceed with
particular attention in these cases.
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use. Ignoring this
warning may result in burns!
To avoid them please follow the instructions very carefully and proceed with
particular attention in these cases.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.

1.3 Hazard sources

DANGER!
Electric shock hazard!
To avoid the hazard results please follow the safety instructions below.
Do not use the device in case of incorrect operation, damages or dropping on the
floor. When the cable is damaged it should be replaced by the service company or
qualified electrician in order to avoid the hazards.
The supply cable must be disconnected from the socket only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of electrical or mechanical
modifications the electric shock hazard will occur.
Never immerse the plug in water or other liquids.
Do not use any acid agents and make sure no water ingresses the device.
Never operate the device with moist hands or standing on wet floor.
- 18 -