Blomberg DUS 2040 X Mode D'emploi page 10

SECTION 5: The information in relation to
the maintenance cleaning and transportation.
Maintenance and Cleaning
1. Upling the plug from the receptade before starting the cleaning. Please pay attention that
the cleaning material, which you are going to use does not contain particles that would scratch
the surfaces with paint or made out of stainless steel. Use cream or liquid cleaners.
2. Please try to clean your aspirator especially just after dishes by frying.
3. Please wipe clean your aspirator by a wet cloth wetted in warm water or in water with
dtergent. You may use the cleaners that you obtain from the market for oil, etc. that does not
wipe out by paying attention to the warnings on these. However, please do not use scratching
and abrasive cleaning materials.
Changing of Illumination lamp
There is 1 each 40 W lamp in your DUS 2040 X model aspirator and there are 2 each 40 W
lamps in your DUS 2042 X and DUS 5042 X model aspirators. You may comfortably take out
and change the lamps by disassembling the aluminum filters an the DUS 2040 X, DUS 2042 X
and DUS 5042 X model products.
In Case You Need Transportation :
1. Please carry the aspirator in its original package and please obey the transportation
instructions on the box.
2. Please tape the guard (screen) glass to the panel with hole to avoid its movement during
transportation, in case you do not have the original packing.
3. Please take measures against impacts that may come on the glass or on the other painted
surfaces.
4. Please keep the product in its normal position during the transportation.
DUS 2040 X DUS 2042 X / DUS 5042 X
Figure 6
8