Blomberg DUS 2040 X Mode D'emploi page 6

SECTION 3 : Installation of your aspirator.
Your aspirator may be installed on your kitchen furniture (Figure 1)
Installation on the cupboard that has been previously drilled :
Please make connection under the cupboard by making use of the
4 each 4.2 x 45 mm screws (given together with your aspirator) through
the previously drilled holes. In such case, there is no need to dismantlethe
filter protection panel / casette filter.
Installation un the cupboard, which has not been drilled :
Please drill 4 each connection holes by making use of the paper template
that is being furnished together
above instructions.
Shelf
in the
cupboard
Upper
installation
holes
Template Tube
hole
(min.)
(Figure 1)
with the aspirator and please apply the
4
Tube
Adapter