Blomberg DUS 2040 X Mode D'emploi page 8

Masquer les pouces Voir aussi pour DUS 2040 X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Uplung the product from the mains or put the switch off or untighten or close the fuse,
which feeds the aspirator.
Aluminum Filter
This filter is for holding the oil particles in the air. Your cleaning the filter in normal use in
intervals of 1 month long is being proposed. For this procers, first take aut the aluminum filters.
Please wash the filters in water with detergent and rinse and dry them. Then please fit the
filters in their places. Colour change may be observed as they are washed. Sudn a situation is
normal and your replacing the filter is not necessary.
Figure 5
The Dismantling Of The Aluminum Filters
1. Please push the aluminum filter lock forward.
2. Them slightly lower it and pull forward. Otherwise you may bend the filter (Figure 5).
Please fit the aluminum filter in its place by following the above steps from the reverse.
Carbon Filter (Usage Without Stack)
This filter gets rid of cooking odours.
Attention : Carbon filter must never be washed.
The carbon filter must be renewed every 4 months in normal usage.
You may obtain the carbon filter from the Beko Authorized Services against payment (Please
refer to page 6).
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dus 2042 xDus 5042 x

Table des Matières