The Remote Control - Indel B FLYINGBAR Mode D'emploi

FLYINGBAR
ENGLISH

ThE REMOTE CONTROL

P1 P2 P3 P4
- +
SET
ON
OFF
189A1018
Open
The FLYINGBAR equipped with a remote control allows you to set the operation of the compressor to
make it work at certain times of day. Each refrigerator has three periods of use which have already been
preset, and one (P4) which can be programmed by the user. One can set a maximum of two ON/OFF cycles
within 24 hours. The remote control is easy to use. After choosing the programme on the remote control,
just point the remote control at the receiver on the inside of the Minibar (at a distance of about 30-40 cm).
Keep the button for the chosen programme on the remote control pressed for at least two seconds: the
Minibar will start to work. The display will display the following symbol.
30
FLYINGBAR_31-03-2015