Working Time - Indel B FLYINGBAR Mode D'emploi

FLYINGBAR
TIMER OpERATION METhOD: USE
The FLYINGBAR are equipped with a pre-set thermostat located on the back of the refrigerator (the
temperature has already been adjusted to the correct operating levels). You can select the duration of the
cooling cycles using the remote control. When the Minibar is connected to power supply, it automatically
turns on using the mechanical thermostat functions.
The compressor is in operation to cool
the contents of Minibar and to freeze
ON
the eutectic plate (6 hours over 24 hour
are sufficient).
Preset programs
PROGRAM
P1
P2
P3
P4
OFF
FLYINGBAR_31-03-2015
The compressor is Off and the cooling
energy stored in the holding plate
OFF
maintains the inside Minibar temperature.
The Minibar is completely noiseless during
the night.

WORkING TIME

1ST CYCLE
09-14
08-14
07-14
FREE
SWITCH ON/OFF
ENGLISH
2ND CYCLE
17-22
17-23
17-23
29