HQ Power PROMIX1212E Notice D'emploi page 11

HUM AND NOISE
20Hz~20kHz, Rs = 150 , input TRIM @ 0dB, input sensitivity @ -60dB
Equivalent Input Noise
Residual Output Noise
LEVEL METERS
Four 11-point LED meters (stereo L-R, group 1-2)
Peak Point
+10, +7, +4 and +2 Points
0, -2, -4, -7, -10 and -20
PHANTOM POWER
+48VDC, globally selected
POWER SUPPLY
120VAC/60Hz or 230VAC/50Hz
POWER CONSUMPTION
40W, external PSU
DIMENSIONS AND WEIGHT
496 x 132 x 494mm, 5.85kg
5. Connections
Unbalanced equipment may be connected to balanced inputs/outputs. Either use mono ¼" jacks or connect the ring
and sleeve of TRS jacks. Never use unbalanced XLR connectors on the MIC input connectors when using the
phantom power supply.
Microphone input
Socket (female)
Headphones
1. Tip = left signal
2. Ring = right signal
3. Sleeve = ground
4. Tip
5. Ring
6. Sleeve
7. Strain relief clamp
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
PROMIX1212E_v2
-129dBm
< 90dBm
red indicator
yellow indicators
green indicators
Group & mix outputs
Plug (male)
Unbalanced mono ¼"
1. Tip = signal
2. Sleeve = ground
3. Tip
4. Sleeve
5. Strain relief clamp
11
Balanced stereo ¼"
1. Tip = hot (+)
2. Ring = cold (-)
3. Sleeve = ground
4. Tip
5. Ring
6. Sleeve
7. Strain relief clamp
HQPOWER