Kongskilde SUC 300 T Instructions De Service page 33

Connecting pipeline to blower
pressure side of the SUC-TR
models
As standard the SUC-TR model is delivered with inte-
grated loading equipment making the machine ideal
for loading trailers. A pipeline can be connected to the
pressure side of the blower, if it is necessary to blow
the grain over larger distances and heights than al-
lowed by the loading equipment.
Mounting pipe system for the suction blower
Always secure the pipe mounted directly on the suction
blower outlet by using clamp with bolt in a way that the
pipe cannot be removed without tools. Always use the
special safety clamp delivered with the suction blower.
Never use quick release clamp on the suction blower
outlet.
Safety clamp
The pipe attached to the suction blower outlet must
have a length of minimum 800mm with a diameter of
maximum 200 mm in order to prevent the possibility for
coming in contact with the suction blower/rotary valve
rotor when the pipe is mounted.
Mount a pipe without joints with a length of minimum
800 mm on the suction blower outlet.
Safety clamp
Min 800 mm
33