Kongskilde SUC 300 T Instructions De Service page 28

Self-cleaning
conveying
When conveying different crops,
which may not be mixed, it is im-
portant that the suction blower runs
empty for some minutes between
the different crops, until no more
grains are coming out of the outlet
cyclone.
Selection of Intake Nozzle
Use the correct intake nozzle for
your conveying job to ensure
maximum conveying capacity and
easiest operation. Note that from
SUC 1000 you will only obtain the
maximum conveying capacity, if the
round intake nozzle No. 121 150
181 is being used..
Universal Intake Nozzle
Designed to be used for most suc-
tion jobs out of full grain bins or flat
storage. Also suitable for final floor
clean-up operation. The handle is
removable.
Order No.: 121 130 212
Clean-up Nozzle
Designed for the final floor clean-
up. Provides a somewhat lower
conveying capacity than the univer-
sal nozzle but is easier to operate
in a clean-up situation.
28
Clearing a blocked
pipe system
Open the slide on the intake nozzle
completely, or raise the intake noz-
zle clear of the material to see if the
blower itself can clear the system.
If this is not possible, separate and
empty the pipe system. Adjust the
slide on the intake nozzle for maxi-
mum conveying capacity.
The nozzle is equipped with wheels
and a swivel between nozzle and
hose to relieve possible twisting on
the nozzle. The handle is
removable.
Order No.: 121 130 187
Short Intake Nozzle
Designed for suction with OK160
pipe from full bin or truck. Shutter
must be fitted to prevent the grain
from running out by itself.
Order No.: 121 000 546
Round Intake Nozzle
Designed for stationary suction out
of full storage bins through hole
in the bin wall. Also suitable to be
used inside round bins or flat
storage areas to remove heaps of
grain before final clean-up begins.
Order No.: 121 130 213
Order No.: 121 150 181(for
SUC1000)
Long Intake Nozzle
Designed for suction from
deep grain pits or large bins.
May be extended with 65 cm
sections. Provides a high
conveying capacity.
Order No.:
Long nozzle: 121 120 300
65 cm extension: 121 120 305