Configuring The Display Settings; Adjusting The 3M Multi-Touch Chassis Video Display; On Screen Display - 3M C3266PW Manuel D'utilisation

11

Configuring the Display Settings

After you connect your 3M Multi-Touch Display and turn on your computer, you
may need to configure the display settings. The ideal setting for the 3M Multi-Touch
Chassis Display is as follows: (Except for the C65 – See table above for values)




Adjusting the 3M Multi-Touch Chassis Video Display

The controls for adjusting the video display are located on the back of the 3M Multi-
Touch Chassis Display. These buttons let you display the on-screen menu to adjust
the video image. Before you make any adjustments:



On Screen Display

Your 3M Multi-Touch Chassis Display has seven controls for adjusting the video
display.
POWER SOURCE



Display Mode
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 720
1280 x 768
1280 x 960
1280 x 1024
1360 x 768
1366 x 768
1600 x 1200
1680 x 1050
1920 x 1080
3840 x 2160
Display mode (video resolution) 1920 x 1080
Refresh rate (vertical sync) 60 Hz
Color depth (number of colors) at least 16-bit (high color)
Adjust the controls in your normal lighting conditions.
Display a test image or pattern whenever you adjust the video.
UP
Power -- Turns the display on and off.
Source -- Selects the applicable input source: VGA, HDMI, Display port, or
DVI. Settings are saved automatically.
Up -- Press to move among the menus and from the menu selection to
specific choices.
3M Touch Systems, Inc. Proprietary Information
TM
3M Multi-Touch Chassis Display User Guide
Refresh Rate (Hz)
60
60
60
70
60
60
60
60
60
60
60
60
60
60 (C6587PW only)
+
DOWN
-
MENU