Multimedia Features; Testing The Multi-Touch Chassis Display; Vesa Mounting Option - 3M C3266PW Manuel D'utilisation

9

Multimedia Features

The 3M Multi-Touch Chassis Display comes with built-in speakers and audio cables
that may be connected to the PC.

Testing the Multi-Touch Chassis Display

Note: The 3M Multi-Touch Chassis Display has a power status light and video
controls located on the side of the display.
Make sure all cables are connected properly. Be sure to tighten all cable screws. Turn
on the power switch located on the back of the display.
To test the display:
1. Turn on your computer.
2. Make sure the video image is displayed. If not, check the LED to ensure that the
display is not in power save mode (amber).
3. Confirm the video image is centered within the viewing area. Use the display
controls to adjust, if necessary.
You can adjust the video controls to better suit your personal preference. For
additional details, refer to the Adjusting the Video Display later in this chapter.

VESA Mounting Option

3M™
mounting
Touch
dimensions
Display
Model
C3266PW 200 X 200
C4267PW 400 X 400
C4667PW 400 X 400
C5567PW 400 X 400
C6587PW 400 X 400
VESA Screw
size &
Max
(MM) Length
(MM)
M4 X 8
M6 X 16
M6 X 16
M6 X 16
M8 X 20
3M Touch Systems, Inc. Proprietary Information
TM
3M Multi-Touch Chassis Display User Guide
Weight
15 kg (33 lbs)
23 kg (50.7 lbs)
26 kg (57.3 lbs)
40 kg (88.2 lbs)
64 kg (141.1 lbs)
Hardware
Accessory Kit
X