Cleaning And Maintenance - Bimar VC90A.NE Notice D'instructions

Fax +32 030 9904733
Timer: this function allows setting the operating time and the fan will automatically stop at the end.
• To set the operating time, repeatedly press the "TIMER" key on the remote control or the control panel:
every time the key is pressed, the time set is changed and the indicator light on the control panel lights
corresponding to the time selected (0.5 hour, 1 hour, 1,5 hours, 2 hours, ecc....): the maximum time is
8 hours.
Mode: the fan can work at a constant speed or with two different intermittent speeds: In "Natural" mode,
the fan alternates between the maximum and minimum speed and turns-off for several seconds. In
"Sleep" mode, the fan alternates with speeds and interruptions different from the preceding. The mode is
selected by pressing the "STYLE" key on the remote control or the control panel.
Ionising function: this produces a flow of negative ions which neutralise the positive ions in the air, this
fuction is On then is selected the button (7) only on the remote control.
Auto function: at this mode, the fan will select proper automatically depending on the current select
proper output automatically depending on the current room temperature and the system set temperature
25°C. If room temperature is more than 25°C, the motor will operate, if room temperature is less than
25°C, the motor will stop automatically. pressi it again to select normal mode (2).
To turn the fan off, press the "OFF" key on the remote control or control panel, then remove the plug
from the socket.
When not in use for long periods, the plug must always be removed from the socket.

CLEANING AND MAINTENANCE

Attention: before normal cleaning, remove the plug from the socket.
• Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand
in the liquid, but first remove the plug from the socket. Carefully dry the appliance and make sure that
all the electrical parts are dry: in the case of doubt, ask for professionally qualified help.
• It is essential that the motor's air holes be kept from dust and lint.
• If the fan will not be used for long periods, it must be protected from dust and humidity; we
recommend storing it in its original packaging.
• Should you decide not to use the appliance any more, we recommend making it inoperative by cutting
the power cord (after making sure you have disconnected the plug from the socket) and make
dangerous parts harmless if children are allowed to play with them.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a
special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a crossed-out wheeled dustbin.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar (Italy).
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don't change the page numbering.
Keep the language integrity.
10 24
/
Assembly page 10/24