Cleaning The Condensate Tray; Cleaning The Housing; Function Tests (Manual/Auto) - Helios AIR1 XH 1000-8500 Notice De Montage Et D'entretien

Installation and Operating Instructions
EN
m
WARNING
m
WARNING
+ +
IMPORTANT IMPORTANT
Central ventilation units AIR1 XH
5 .7

Cleaning the condensate tray

m
Danger to life due to electric shock!
The unit must be fully isolated from the mains power supply before all maintenance and cleaning work.
Risk of injury due to electric shock, moving parts (fan) and hot surfaces .
If a condensate pump is installed, disconnect the condensate pump connections before removing the service
door .
The condensate tray must be checked for contamination and damage every 6 months.
1. Unscrew and remove the service panels (see Fig. 46).
2. Clean the condensate tray with a cloth (see Fig. 47).
5 .8

Cleaning the housing

m
Danger to life due to electric shock!
The unit must be fully isolated from the mains power supply before all maintenance and cleaning work.
Risk of injury due to electric shock, moving parts (fan) and hot surfaces .
– The housing must be checked for dirt, damage and corrosion every 12 months.
– Clean the housing with a damp cloth.
5 .9

Function tests (manual/auto)

The components connected to the controller can be manually operated and tested individually in this component test
menu.
All functions must be reset to "Auto" after testing. Otherwise, the normal control function will be interrupted and an
alarm will sound.
Access to this menu requires the Service or Admin operating level. If necessary, log on under "Access rights".
Fig .47
73
Fig .46