Technical Data - Husqvarna 224L Manuel D'utilisation

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Emissions Durability Period according to
California Air Resources Board, h.
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear, measured
according to ANSI B175.3-2003, dB(A), min/max:
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-2003, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved
cutting equipment fitted. The table indicates the highest and lowest values.
1155650-49 Rev. 3 2013-03-18
TECHNICAL DATA
3
2
224L
1,53/25,0
1,38/35
1,03/26
3100
12000
8220
0,8 / 7000
No
No
300
Ikeda
NGK CMR5H
0,024/0,6
Walbro
1,16/0,55
11,0/5,0
90/97
1,9/1,8
2,2/1,9
4,8/11,3
8,9/14,0
–
English 23