Wireless Olympus Rc Flash System - Metz Mecablitz 58 AF-2 digital Mode D'emploi

18 Wireless Olympus RC flash system (

The slave flash mode is only supported by suitable cameras (e.g.,
Olympus E3, E420, SP570UZ) ! Please refer to the camera operating
manual for information on the camera settings for the remote mode RC.
In the remote mode, the flash range is not indicated on the flash unit!
Switching the wireless RC flash system on and off
BEEP
Select
Remote
FB
Set
)
SL
Sel
Set
SLAVE
SLAVE
In the remote mode, the AF measuring beam
will start blinking as soon as the flash readiness
display lights up when the flash is
ready.
18.1 Remote modes
In the remove modes TTL and automatic A, additional manual flash
exposure corrections can be set on the camera (see camera operating
manual).
Remote groups
Set
SLAVE
GROUP:A EZoom 50
CHANNEL:1
Para Sel